Nitrous Outlet
Newly designed high flowing solenoids built to work with today’s fuels.
The highest flowing, best atomizing and best fitting Nitrous Plate available!
Custom designed solenoid mounts.
Prefabricated Stainless Hard lines.
Precise fitment fittings.
CNC machined fuel feed with Prefabricated Hard line.
TPS extension Harness.
Neatly hides away under factory engine cover.
Bolts on using all factory equipment. (Including cold air box)
Wide range of accessories to work in conjunction with our nitrous system.
Capable of supporting Horse power levels up to 400 HP! |
|
| |
|
| itemno |
description |
price |
buy |
| NO2010 |
Nitrous Outlet LS3 Camaro Nitrous Kit
|
$603.25 |
buy |
|
Airaid
Airaid Z06 Induction
Airaid intake systems are specifically designed to take full advantage of today's vehicle technology, thereby increasing engine efficiency and horsepower output. Their unique inlet and track filter combination is substantially less restrictive when compared to OEM-type airboxes, improving airflow by up to 20 percent and power by as much as 18 hp. Specially designed splash shields protect the filter from engine heat and inclement weather (tube-type and splash shields depend upon the application). The filters are washable, reusable, and will last for the life of the vehicle. Lastly, Airaid intake systems are easy to install with basic hand tools in as little as 30 minutes, and no fabrication is required. |
|
| |
|
| itemno |
description |
price |
buy |
| AR250-216 |
Airaid Corvette LS7 Induction
|
$244.99 |
buy |
|
GM Motorsport
GMM Ripshift
The 2008-2009 G8 and 2010+ Camaro shifter is far less than adequate for spirited driving. The rubber feel and extended linkage design gives the driver a disconnected feel for what is really going on and selecting gears.
Speed Inc has been importing GMM shifters for Holden Designed vehicles since 2004. The manufacturer of the smoothest and most precise GTO shifter now has the answer for G8 and Camaro owners.
For road racing, drag racing, and even weekend cruising --- this shifter gives you the solid feel and precision to compliment the raw power of your G8 or Camaro! |
|
| |
|
| itemno |
description |
price |
buy |
| RIPSHIFTVE |
GMM Ripshift G8/Camaro Shifter
|
$349.99 |
buy |
|
Halltech
Halltech Yellow Jacket Induction
Halltech's Yellow Jacket™ 102mm Cold Air Induction System is the hottest mod you can add to your 2010 Camaro SS. 14 RWHP gain on a stock Camaro and no tuning. 30+ RWHP gain on a modified and tuned Camaro. |
|
| |
|
| itemno |
description |
price |
buy |
| YJ102 |
Halltech 102mm Camaro Yellow Jacket Induction - Black Plastic
|
$399.99 |
buy |
| YJ440CF |
Halltech 102mm Camaro Yellow Jacket Induction - Carbon Fiber
|
$699.99 |
buy |
|
UMI
Sway Bar Installation Kit
If you have an aftermarket rear end and no way to install a rear sway, this kit is the solution. This kit includes everything needed to install a factory or aftermarket sway bar to your new rear end. Supplied with this kit is new bolt on CNC machined bushings mounts, heavy duty zinc plated chrome moly u-bolts and longer end links. This kit places the sway bar below the larger center section on aftermarket rear ends and provides proper clearance. The supplied longer end links provide the proper geometry of the rear sway in its new mounting location.Requires no welding. Note: This kit will also work on adapting a rear sway bar to vehicles that were not supplied with a sway bar from the factory.
Polyurethane Sway Bar Bushings: Due to the larger u-bolts needed for aftermarket rear ends the factory sway bar bushings and clamshells will not work. This kit requires polyurethane bushings that feature larger slots for a universal fit. We have these bushings available in 19mm and 22mm, if you purchased an aftermarket sway bar it most likely was supplied with these bushings. |
|
| |
|
| itemno |
description |
price |
buy |
| UMI2244-300 |
UMI rear end sway bar installation kit (3in Axle Tubes)
|
$74.99 |
buy |
|
Vortech
Vortech
Systems include billet aluminum twin-plate mounting bracketry, dedicated 10-rib supercharger drive
with automatic belt tensioner, SFI-approved replacement race-spec crank damper, custom roto-molded
cold-air inlet ducting, High capacity air-to-air charge cooler, 3” mandrel bent aluminum charge cooler
ducting, Vortech race bypass valve, 4” mass air flow housing, and high-flow replacement fuel injectors |
|
| |
|
| itemno |
description |
price |
buy |
| 4GE218-010L |
Vortech 5th Gen Satin Finish System
|
$6347.00 |
buy |
| 4GE218-018L |
Vortech 5th Gen Polished Finish System
|
$6621.00 |
buy |
| 4GE218-110L |
Vortech 5th Gen V3 Tuner Kit Satin Finish
|
$5749.00 |
buy |
| 4GE218-118L |
Vortech 5th Gen V3 Tuner Kit Polished Finish
|
$6023.00 |
buy |
| 4GE218-120 |
Vortech 5th Gen V7 Tuner Kit Satin Finish
|
$6702.00 |
buy |
| 4GE218-128 |
Vortech 5th Gen V7 Tuner Kit Polished Finish
|
$7005.00 |
buy |
|
Spohn
Tubular Rear Trailing Arms
Spohn tubular rear trailing arms will lock in your caster settings, minimize wheel hop and increase traction. Our tubular rear trailing arms are much stronger than the factory's stamped steel arms, these tubular rear trailing arms are constructed from 1.25" x .095" wall DOM tubing and 1/4" CNC laser cut and formed steel mounting brackets that are fully gusseted to eliminate flex and provide for maximum strength and durability. These tubular rear trailing arms are equipped with fluted and greaseable polyurethane bushings rather than the soft rubber bushings that come from the factory.
They are a 100% bolt-in installation using factory hardware. These tubular rear trailing arms weigh in at only 6.30#/pair. Available powder coated in your choice of black or red for an attractive and durable finish. |
|
| |
|
| itemno |
description |
price |
buy |
| SPC10-201 |
5th Gen Tubular Rear Trailing Arms with Polyurethane Bushings
|
$120.00 |
buy |
| SPC10-201-DEL |
5th Gen Tubular Rear Trailing Arms with Delrin Bushings
|
$157.50 |
buy |
| SPC10-203 |
5th Gen Tubular Rear Trailing Arms with Spherical Rod Ends
|
$180.00 |
buy |
| SPC10-205 |
5th Gen Tubular Rear Trailing Arms with Del-Sphere Pivot Joints
|
$195.00 |
buy |
| SPC10-201-4130 |
Upgrade Spohn 5th Gen Trailing Arms/Toe Links to 4130N Chrome moly
|
$40.00 |
buy |
|
Spohn
Rear Toe Links
Lock in your toe settings, minimize wheel hop and increase traction with a set of our tubular rear toe links. Our tubular rear toe links are much stronger than the factory's stamped steel toe links, these tubular rear toe links are constructed from 1.25" x .095" wall DOM tubing to eliminate flex and are 100% TIG welded to provide for maximum strength and durability. These tubular rear toe links are equipped with fluted and greaseable polyurethane bushings rather than the soft rubber bushings from the factory. They are a 100% bolt-in installation using factory hardware and include the ABS line mounts just like the factory toe links. These tubular rear toe links weigh in at only 4.70#/pair. Available powder coated in your choice of the above colors for an attractive and durable finish. |
|
| |
|
| itemno |
description |
price |
buy |
| SPC10-601 |
5th Gen Tubular Rear Toe Links with Polyurethane Bushings
|
$120.00 |
buy |
| SPC10-603 |
5th Gen Tubular Rear Toe Links with Spherical Rod Ends
|
$224.00 |
buy |
| SPC10-605 |
5th Gen Tubular Rear Toe Links with Del-Sphere Pivot Joints
|
$254.00 |
buy |
| SPC10-201-4130 |
Upgrade Spohn 5th Gen Trailing Arms/Toe Links to 4130N Chrome moly
|
$40.00 |
buy |
|
Eibach
Anti Roll Sway Bar Kit
Complete your suspension upgrade with an Eibach Anti-Roll-Kit. Our Anti-Roll-Kit reduce body roll through increased design stiffness over stock bars. The result: increased handling and cornering grip in any performance-driving situation. Manufactured from cold-formed, high-strength aircraft-grade steel for precision performance, and finished with a long-lasting red powder coat finish, the Anti-Roll-Kit comes complete with all necessary mounting hardware and instructions for easy installation. |
|
| |
|
| itemno |
description |
price |
buy |
| EIB-38144.320 |
Eibach Anti Roll Sway Bar Kit - 5th Gen
|
$339.00 |
buy |
|
BMR Fabrication
Toe Rods
The toe rod is responsible for maintaining toe settings of the the rear wheels similar to tie rod ends on the front end. This ensures that the wheels remain set to a fixed position, not erratically pointing inward or outward under loading. The factory rods are made from flimsy stamped steel and use soft rubber bushings at the mounting points. Under load, deflection can cause poor launch stability, inconsistent handling and decreased braking ability. BMR toe rods are made from heavy duty 1" x 2" heavy wall DOM and use
our spiral fluted, low deflection polyurethane bushings. Quick and easy install with no decrease in ride quality. Available in black hammertone or red powdercoat. |
|
| |
|
| itemno |
description |
price |
buy |
| BMRTR002 |
BMR Rear Toe Rods
|
$119.95 |
buy |
| BMRTR003 |
BMR Rear Toe Rods Adjustable (Poly)
|
$199.95 |
buy |
| BMRTR004 |
BMR Rear Toe Rods Adjustable (Rod End)
|
$229.95 |
buy |
|
Hawk
Hawk Pads
HPS - High Performance Street Hawk Performance HPS compound provides advanced braking characteristics to enhance your driving experience. This unique compound combines the safety and quality of Aerospace design partnered with the braking technology of motorsports. |
|
| |
|
| itemno |
description |
price |
buy |
| HB453F.585 |
Hawk Performance Pads - 1st Gen CTSV/5th Gen Camaro - Front
|
$117.99 |
buy |
| HB194F.570 |
Hawk Performance Pads - 5th Gen Camaro - Rear
|
$108.99 |
buy |
| HB453Z.585 |
Hawk Performance Pads - 5th Gen Camaro - Front - Ceramic
|
$129.99 |
buy |
| HB194Z.570 |
Hawk Performance Pads - 5th Gen Camaro - Rear - Ceramic
|
$111.99 |
buy |
|
SLP Performance
SLP Blackwing Induction
More Details Coming Soon... |
|
| |
|
| itemno |
description |
price |
buy |
| SLP21125A |
SLP Blackwing Induction - Camaro V6
|
$179.99 |
buy |
| SLP21126A |
SLP Blackwing Induction - Camaro V8
|
$179.99 |
buy |
| SLP21127A |
SLP Blackwing Induction - Camaro V8 w/TVS2300 Blower
|
$179.99 |
buy |
|
Airaid
Airaid Camaro Induction
* Extra Large High Flow Air Filter
* Cold Air Dam Design
* Massive 4” Intake Tube
* Easy Bolt On Installation
* Exclusive “No Hassle” Warranty |
|
| |
|
| itemno |
description |
price |
buy |
| AIR250-243 |
Airaid MXP Induction - Camaro LS3
|
$339.99 |
buy |
|
The Drive Shaft Shop
Axles/CV Joints
These Extreme-Duty axles for the 2010+ Chevrolet Camaro SS are designed to handle up to 1,000 HP! Using chrome moly center bars, 108mm Porsche style CV's and bolt on chrome moly inner and outer stubs, these are a direct bolt on that fit the stock hubs and come complete with all the necessary hardware. Not only will these axles handle the horsepower, they use different diameter chrome moly axle bars on each side which will eliminate wheel hop. Wheel hop at launch can be extremely damaging to the drivetrain and makes getting traction very difficult. By allowing the axle bars to torsionally twist at different rates the result is traction, not wheel hop! |
|
| |
|
| itemno |
description |
price |
buy |
| SPC10-1000A |
1000 HP Extreme Duty Rear Axles & CV Joints Package
|
$1849.95 |
buy |
|
Hurst
Hurst Shifter Billet/Plus 2
* 2010 Chevrolet Camaro, V6 and V8
* CNC machined stainless steel stick assembly
* Nylon lined spherical pivot bearing
* Shift throw reduced for quicker shifts
* Smooth positive mechanism
* Bolt on classic chrome plated stick and white knob
* CNC machined stick adapter accepts Classic Hurst stick |
|
| |
|
| itemno |
description |
price |
buy |
| HUR3916030 |
Hurst Shifter Billet/Plus 2
|
$319.95 |
buy |
| HUR1361000 |
Hurst Equipped Badge
|
$12.95 |
buy |
|
Flowmaster
Flowmaster LS3 Camaro
Set to challenge the Mustang, the new 2010 Camaro is on it's way to becoming one of the most popular muscle cars once again. To satisfy customer demand for improving the performance and sound of these great cars, Flowmaster now offers their 3.00" American Thunder Cat-Back system. Using tried and true Flowmaster Classic Two Chamber mufflers, the kit is a true bolt-on system for the new Camaro SS with 6.2L V8 and features a 3.00" Scavenger X-pipe assembly for mid range torque improvement. The specially constructed Classic Two Chamber mufflers provide a significant performance boost and an incredible, aggressive sound quality, perfect for these great muscle cars. Constructed with durable 409S stainless steel and finished off with 4.00" polished tips |
|
| |
|
| itemno |
description |
price |
buy |
| FLO817481 |
Flowmaster Exhaust - LS3 Camaro
|
$749.00 |
buy |
|
SPEC
SPEC Clutch Kits
SPEC is a Manufacturer of street high performance and racing clutches and flywheels. Featuring Clutch Kits From street kit Stage 1,2,2+, 3, and 3+ to Race Kits Stage 4 and 5. Every SPEC Clutch Kit and Flywheel has been SFI Approved. |
|
| |
|
| itemno |
description |
price |
buy |
| SC661 |
Spec Clutch Kit - Stage 1 LS3 Camaro
|
$314.10 |
buy |
| SC662 |
Spec Clutch Kit - Stage 2 LS3 Camaro
|
$386.10 |
buy |
| SC663H |
Spec Clutch Kit - Stage 2+ LS3 Camaro
|
$450.90 |
buy |
| SC663 |
Spec Clutch Kit - Stage 3 LS3 Camaro
|
$404.10 |
buy |
| SC663F |
Spec Clutch Kit - Stage 3+ LS3 Camaro
|
$538.20 |
buy |
| SC664 |
Spec Clutch Kit - Stage 4 LS3 Camaro
|
$422.10 |
buy |
| SC665 |
Spec Clutch Kit - Stage 5 LS3 Camaro
|
$485.10 |
buy |
| SC75A |
Spec Aluminum Flywheel
|
$359.10 |
buy |
| SC75S |
Spec Billet Steel Flywheel
|
$233.99 |
buy |
|
BMR Fabrication
Sub Frame Connectors
Stiffen up the chassis for greatly improved handling with Sub Frame Connectors from BMR Fabrication. Constructed of 1" x 1" x .120 wall rectangular tubing and 3/16" CNC laser cut and formed steel plates, these Sub Frame Connectors use pre-existing bolt holes on the Camaro for a truly bolt-in piece. The triangulating design stiffens and reinforces the chassis by joining three key areas of the vehicle's chassis: the front sub frames, carrier bearing location, and the rear sub frame where the rear suspension cradle mounts |
|
| |
|
| itemno |
description |
price |
buy |
| BMRSFC015 |
BMR Camaro Subframe Connectors
|
$249.95 |
buy |
|
SLP Performance
SLP Line Lock
Press the brake pedal and flip the brake control solenoid switch. Take your foot off the brake and the solenoid maintains line pressure to the front brakes until the switch is released. This makes it easy to heat the rear tires while minimizing wear and tear on your car’s rear brake components. This kit is fully compatible with the factory anti-lock braking and traction control system, Includes a waterproof electrical solenoid, activation switch, plug-in wires, CNC-bent steel lines with OEM compatible fittings, mounting hardware and detailed installation instructions. Requires brake bleeding. |
|
| |
|
| itemno |
description |
price |
buy |
| SLP25005 |
SLP 5th Gen Camaro Line Lock
|
$179.99 |
buy |
|
SJM
SJM Line Lock
Each Line Lock Kit includes: Pre-formed lines, rebuildable SJM solenoid, master switch with remote LED, control switch, wire, fuse with holder, electrical connectors, complete directions including pictorials and schematics. ABS compatible.
Ease of use: Flip the master switch, remote LED illuminates brilliantly. The circuit is live and ready to use via momentary control switch. For safety, when not in use flip the master switch off to prevents accidental deployment of line lock circuitry. |
|
| |
|
| itemno |
description |
price |
buy |
| SJM-4B2010 |
SJM 5th Gen Camaro Line Lock Kit
|
$174.99 |
buy |
|
Precision Industries
6L80E Vigilante Converters
This 9.5" Lockup converter comes in your choice of stall speed as well as a 2 year warranty from Precision. 1 Free stall speed change is offered by Precision in case you change your setup or style of driving. |
|
| |
|
| itemno |
description |
price |
buy |
| PIV319015 |
Vigilante Converter 2800-3000 Stall (6L80E)
|
$724.99 |
buy |
| PIV319615 |
Vigilante Converter 3200-3400 Stall (6L80E)
|
$724.99 |
buy |
| PIV319715 |
Vigilante Converter 3600-3800 Stall (6L80E)
|
$724.99 |
buy |
|
Nitrous Outlet
Nitrous Outlet Direct Fit Plate Kits
Unlike other brand nitrous systems on the market the Nitrous Outlet system is truly a system designed to fit your application. Other companies use universal solenoid brackets and have sloppy looking braided hoses lying all over the top of the engine. The Nitrous Outlet system comes with application specific hardware so that you will not have to order special fittings or different length hoses for a custom looking install. In return you get the best fitment with out the universal sloppy look.
- Available with no bottle, black 10lb or 15lb bottle.
- High flow 45 degree bottle valve with dual accessory ports.
- Quality bottom exit high flowing solenoids built to work with today’s fuels.
- The highest flowing, best atomizing and best fitting Nitrous Plate available!
- Custom designed solenoid mounts.
- Prefabricated Stainless Hard lines.
- Precise fitment fittings.
- CNC machined fuel feed with Prefabricated Hard line.
- Quick release stainless steel bottle brackets.
- Bolts on using all factory equipment. (Including cold air box)
- Jetting from 50-200 HP.
- Capable of supporting Horse power levels up to 400 HP!
- E85 Compatible with different jetting.
- Made in the USA!
|
|
| |
|
| itemno |
description |
price |
buy |
| NO-00-10118-78 |
Nitrous Outlet 98-02 F-body 78mm Plate System
|
$581.99 |
buy |
| NO-00-10118-90 |
Nitrous Outlet 98-02 F-body 90mm Plate System
|
$581.99 |
buy |
| NO-00-10118-92 |
Nitrous Outlet 98-02 F-body 92mm Plate System
|
$581.99 |
buy |
| NO-00-10122-78 |
Nitrous Outlet 97-04 Corvette 78mm Plate System
|
$598.49 |
buy |
| NO-00-10122-90 |
Nitrous Outlet 97-04 Corvette 90mm Plate System
|
$598.49 |
buy |
| NO-00-10122-92 |
Nitrous Outlet 97-04 Corvette 92mm Plate System
|
$598.49 |
buy |
|
Pacesetter Headers
Pacesetter Headers
Pacesetter offers quality and value-priced alternative to unnecessarily more expensive long tube designs. Manufactured in the USA by PaceSetter, using flash-controlled 16-gauge carbon steel tubing for greater durability. The mandrel bends and CNC-machined, 3/8" thick steel flanges for the best performance. Gaskets and fasteners necessary for installation are included. |
|
| |
|
| itemno |
description |
price |
buy |
| PS70-2257 |
Pace Setter 2010+ Camaro Headers
|
$292.99 |
buy |
| PS70C2257 |
Pace Setter 2010+ Camaro Headers - COATED
|
$456.99 |
buy |
| PS82-1162 |
Pace Setter 2010+ Camaro Mid-pipes
|
$124.99 |
buy |
| PS82-1164 |
Pace Setter 2010+ Camaro Mid-pipes w/cats
|
$259.99 |
buy |
|
Pacesetter Headers
Pacesetter Headers
Pacesetter offers quality and value-priced alternative to unnecessarily more expensive long tube designs. Manufactured in the USA by PaceSetter, using flash-controlled 16-gauge carbon steel tubing for greater durability. The mandrel bends and CNC-machined, 3/8" thick steel flanges for the best performance. Gaskets and fasteners necessary for installation are included. |
|
| |
|
| itemno |
description |
price |
buy |
| PS70-2259 |
Pace Setter 08-09 G8 GT/GXP Headers
|
$292.99 |
buy |
| PS70C2259 |
Pace Setter 08-09 G8 GT/GXP Headers - COATED
|
$456.99 |
buy |
| PS82-1168 |
Pace Setter 08-09 G8 (GT ONLY) Mid-pipes
|
$69.99 |
buy |
|
Speed Inc
Chrs1313 Ram Air
-The Ram Air has gained 2+ mph on every car tested and as much as 2.7 mph. We have seen 1+ mph gains over others similar raim air kit which are heavier as well.
-The kit is made from .040" thick aluminum and black epoxy coated. The aluminium contruction keeps it very light with the racer in mind coming it at 1.5lbs total, some others are made from Stainless Steel and can weigh ~5lbs (FTRA)
-Minor modification are required for proper fit of the kit. The ram air will work with the front bumper support in place as well as the windshield washer reservoir. Only thing that must be removed is the A/C condenser.
-It is made to be fully functional on the street and track, with a removable front scoop. The removable scoop is so you wont have to worry about ripping it off on curbs, or park blocks. |
|
| |
|
| itemno |
description |
price |
buy |
| Chrs1313RA |
Chrs1313 Ram Air (4th Gen F-Body)
|
$199.99 |
buy |
|
SJM
Line Lock
Each Line Lock Kit includes: Pre-formed lines, rebuildable SJM solenoid, master switch with remote LED, control switch, wire, fuse with holder, electrical connectors, complete directions including pictorials and schematics. ABS compatible.
Ease of use: Flip the master switch, remote LED illuminates brilliantly. The circuit is live and ready to use via momentary control switch. For safety, when not in use flip the master switch off to prevents accidental deployment of line lock circuitry.
Solenoid Mounting Location:
Front Mount: mounts on front fender well. Pro: Stealthy Appearance
Top Mount: mounts on top of fender well. Pro: Simplified Solenoid installation
Note: No modification is necessary to existing brake lines for a direct bolt on kit. No Teflon tape required; fittings come pre-assembled! |
|
| |
|
| itemno |
description |
price |
buy |
| SJM-2B001TM |
SJM LS1 F-body Line Lock Kit (Top Mount)
|
$135.99 |
buy |
| SJM-2B001FM |
SJM LS1 F-body Line Lock Kit (Front Mount)
|
$135.99 |
buy |
|
Machine Head
LT-1 Accessory Relocation Brackets
This kit allows you to use all of your stock accessories, and is a direct bolt-on. Includes all brackets, hardware, idlers and belt required. Kits are available in black or silver powder coat, polished finished is available as a custom order.
*Note with order, which balancer you're using, factory or underdrive |
|
| |
|
| itemno |
description |
price |
buy |
| MHI003B |
LT1 Alternator Relocation Kit (Black)
|
$234.99 |
buy |
| MHI003P |
LT1 Alternator Relocation Kit (Silver)
|
$234.99 |
buy |
| MHI004B |
LT1 Alternator and Power Steering Relocation Kit (Black)
|
$399.99 |
buy |
| MHI004P |
LT1 Alternator and Power Steering Relocation Kit (Silver)
|
$399.99 |
buy |
| MHI005B |
LT1 Alternator, Power Steering, and A/C Relocation Kit (Black)
|
$474.99 |
buy |
| MHI005P |
LT1 Alternator, Power Steering, and A/C Relocation Kit (Silver)
|
$474.99 |
buy |
|
Billet Specialties
Billet Specialties - Street Lite
Product Features:
• Street or strip
• SFI 15.1 approved
• 360° welded 2-piece lightweight construction
• Outstanding strength to weight ratio
• Polished and machined finishes combine for an aggressive look
• Forged center & aluminum rim for strength and superior run-out
• Bolt-on center cap included
• Outstanding street wheels
• Lug nuts NOT included
|
|
| |
|
| itemno |
description |
price |
buy |
| BIL-SLF |
Billet Specialties - Street Lite 15x4- F-Body Specific
|
$229.99ea |
buy |
| BIL-SLR |
Billet Specialties - Street Lite 15x10- F-Body Specific
|
$336.99 ea |
buy |
|
Alan Combs Enterprises
LSx Engine Stand
Store or Transport your LS Based engine with stability. Our LS1 stand is made with 1" x 2" x 14 gauge tubing. The mounting plate is made with 1/4" steel. The stand has 9 1/4" clearance w/ out casters to fit the deep oil pans. Mounting bolts are included. Comes with red powdercoat finish. |
|
| |
|
| itemno |
description |
price |
buy |
| CE-100-2PLS1 |
LSX Cradle/Stand, Red powdercoat finish, w/bolts
|
$39.99 |
buy |
| CE-100-2P |
LT1 and Small Block Chevy Cradle/Stand, Red powdercoat finish
|
$39.99 |
buy |
| CE-100-2PCMT |
3” Swivel 1200# Caster kit
|
$39.99 |
buy |
|
Speed Inc
Fluid Dampened Balancer
25% Underdriven, Dyno Proven 12HP gain, SFI approved Crank Balancer Pulley. Unlike other poor designs, the construction of this balancer will not cause “false knock”, which retards the ignition timing. High quality, affordable, and have peace of mind with its SFI approval.
LIMITED STOCK, SALE PRICED WHILE THEY LAST!! |
|
| |
|
| itemno |
description |
price |
buy |
| IZM4521 |
98-02 F-body, 04-06 GTO Underdrive Crank Balancer Pulley
Sale Price Expires: 03/31/2010
|
$169.99
$129.99 |
N/A |
|
Richmond
Richmond Gearsets
Upgrade the rear end in your Camaro to either a 3.73 or 4.10 with these Richmond gears. Computer recalibration is necessary for a correct speedometer reading. Send in your PCM for a Speed Inc Basic Tune and we can recalibrate it for you. |
|
| |
|
| itemno |
description |
price |
buy |
| RMG490187 |
Richmond 3.73 Gear set (V8)
|
$649.99 |
buy |
| RMG490492 |
Richmond 4.10 Gear set (V8)
|
$649.99 |
buy |
| RMG491077 |
Richmond Gear Install Kit (V8)
|
$349.99 |
buy |
| TUNE |
GM Basic Tune (Print and Send form from Services Page)
|
$150.00 |
buy |
|
Borla
Borla Headers
Stainless Steel headers for the 6.2L V8 Camaro. |
|
| |
|
| itemno |
description |
price |
buy |
| BOR17249 |
Borla 5th Gen Camaro Headers
|
$915.99 |
buy |
|
JET
JET MAF Sensor
Jet Performance Products 69143
Gain approximately 8 hp using the stock intake housing, but combine this with a custom air intake or aftermarket cold air intake and gain more!. It adjusts the air fuel mixture. |
|
| |
|
| itemno |
description |
price |
buy |
| JET69143 |
JET 5th Gen MAF Sensor
|
$349.99 |
buy |
|
GM Performance Parts
GM Short-Throw Shifter Kit
A greater feeling of control comes with a precise, quick-acting shifter. GM Performance Parts’ short-throw shifter kits for both V-6 and V-8 models deliver sharper and quicker throws between gears, enabling you to keep the engine’s revs right where you want them for optimal performance.
We worked with legendary shifter manufacturer Hurst® to develop the kits, so they complement great performance with classic styling. The kits include all necessary hardware and detailed instructions. |
|
| |
|
| itemno |
description |
price |
buy |
| GM92214388 |
GM Short Throw Shifter Kit (5th Gen Camaro)
|
$359.99 |
buy |
|
GM Performance Parts
Z06 Six Piston Brake Upgrade Kit
The legendary Z06 brake upgrade is available for your 1997+ C5 and C6 corvette. This kit includes OEM rotors and calipers.
We also include Hawk brake pads for the best in stopping power. |
|
| |
|
| itemno |
description |
price |
buy |
| C6Z06BRAKEKIT |
GMPP C6Z06 BRAKE UPGRADE KIT
|
$2799.90 |
buy |
|
Fast Toys Performance
98 mm LS1 Air Lid
Fast Toys High Flow Black 98 mm LS1 Air Lid Powerful LS1 motors require higher airflow than the stock air lid and MAF can provide. Until now, you were stuck using a small MAF or a reduction coupler with an 85mm GM MAF. Both of these restrict airflow and cost you horsepower.
Note: 2000-2002 cars will still be required to use a K&N breather filter for the smog pump |
|
| |
|
| itemno |
description |
price |
buy |
| FT98AIRLID |
Fast Toys Black 98 mm LS1 High Flow Air Lid
|
$146.99 |
buy |
| FTC98AIRLID |
Fast Toys Clear 98 mm LS1 High Flow Air Lid
|
$159.99 |
buy |
|
SLP Performance
Sway Bar Set
SLP's PERFORMANCE FRONT AND REAR SWAY BAR PACKAGE with adjustable links provides an easy-to-install, cost-effective upgrade that will significantly improve traction and the overall handling characteristics of the V6 and V8 Camaros. These tubular bars are both 29mm in diameter compared to the 23mm solid front and rear factory bars. The front bar has two positions of adjustability, while the rear bar has three adjustments. |
|
| |
|
| itemno |
description |
price |
buy |
| SLP70040A |
SLP 5th Gen Sway Bar Set
|
$414.99 |
buy |
|
LG Motorsports
LG Short Throw Shifter
This new short throw shifter is a direct replacement for your long throw stock unit. No modifications to the car are needed and the install does not require removal of the exhaust or transmission.
The sloppy factory shifter with it's long throws are now eliminated with just a few bolts and little time. This will reduce throws by over 25% of stock!
We now offer shifters for both stock replacement knobs as well as a threaded shaft version to use any threaded knob with a M16 thread |
|
| |
|
| itemno |
description |
price |
buy |
| LGSS |
LG Short Throw Shifter
|
$199.99 |
buy |
| LGSS-T |
LG Short Throw Shifter - M16 Thread
|
$199.99 |
buy |
|
Speed Inc
Speed Inc LT1 Fuel Line Kit
Remove the stock bulky plastic fuel lines on your LT1 powered F-body and replace them with our fuel line kit. Lines come assembled and are available with red/blue fittings and stainless steel braided hose - or with black fittings and black braided hose. Clean up your engine bay today with this quick and easy mod. Works on 94-97 F-Body LT1 cars. Email Larry for options for 1993 models. |
|
| |
|
| itemno |
description |
price |
buy |
| IZMLT1-1 |
Fuel line Relocation Kit: Includes Red/Blue fittings
|
$155.00 |
buy |
| IZMLT1-2 |
Fuel line Relocation Kit: Includes Black fittings - Stainless Braided Hose
|
$155.00 |
buy |
| IZMLT1-2C |
Fuel line Relocation Kit: Includes Black fittings - Black Cloth Braided Hose
|
$155.00 |
buy |
|
Prices do not include shipping and are subject to change without
notice. Returns are subject to a 20% restocking fee
|
|
Click
Here for More Photos
